2Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets(Cover/Sheet Insertion)2-10Useful Copy Functions5 Select the paper source for each cover/sheet insertion press“OK” press “Done.”The specified mode is set and the display returns to the Basic Features screen.IMPORTANT• Select the same paper size for the front and back cover, sheet insertions, and chapterpage.• When one of the paper sizes is changed to another size, the other two will be changed. Butwhen only the paper drawer is changed with the same paper size, the other two sizes will notbe changed.NOTE• The display will vary depending on the mode selected.6 Press (Start).When the original is placed on the platen glass, follow the instructions that appear on thedisplay and press (Start) once for each original. When scanning is completed, press“Done.”Copying starts.NOTE• To cancel the setting, press “Special Features” “Cover/Sheet Insertion” “Cancel,” inthis order.• To cancel all settings and return the machine to the Standard mode, press (Reset).