Canon imageRUNNER 3300 Series Copying Manual

Also see for imageRUNNER 2200 Series: Guide Guide

Contents

Canon imageRUNNER 3300 Series Copying Manual Manual pdf 141 page image

Recalling a Previous Copy Setting (Recall) 2-57Useful Copy Functions2Recalling a Previous Copy Setting (Recall)With this function, you can recall up to three previous copy settings and make copies usingthese settings.IMPORTANT• One copy job is defined by setting the number of copies, exposure, copy ratio, etc., and pressing(Start) or (Reset) when the Auto Clear function is “On”, or by calling up a copy job storedin memory. If one of these keys was not pressed, or if the Auto Clear function is not active, thencalling up a copy job by pressing “Recall” is not possible.• The Standard mode cannot be recalled by this procedure.• Identical copy settings are counted as one setting.NOTE• Once stored, the last three copy settings are held in memory even if the power is turned off.1 Place your originals, and press “Special Features” “Recall.”2 Select either “1 Before,” “2 Before,” or “3 Before” confirm thesettings press “OK” “Done.”The display returns to the Basic Features screen.NOTE• You can also check which copy jobs are stored to memory other than the currentlydisplayed copy job by pressing “▲” or “ ▼.”3 Press (Start).Copying starts.