Changing the Copy Ratio (Copy Ratio) 1-27Basic Copying1Changing the Copy Ratio (Copy Ratio)You can set the machine to adjust the copy ratio automatically, or to specify the copy ratio fora job.NOTE• If you want to make copies at the copy ratio of 100%, press “Direct.”Enlarging/Reducing Originals to a Standard Size(Preset Zoom)You can enlarge or reduce standard size originals to a standard paper size.IMPORTANT• Place your originals horizontally in the following cases:- When enlarging LTR-size originals to 11" x 17" or LGL-size paper- When enlarging STMT-size originals to 11" x 17"-size paper• When reducing 11" x 17" or LGL-size originals to LTR-size with Image Orientation Priority set to“Off,” place LTRR-size paper in the paper drawer or stack bypass.NOTE• Placing an original horizontally means setting the original with the longer side sideways.■ ReduceThe copy ratio set when making reduced copies is as follows:-LGL LTR (78%)-11" x 17" LGL, 11" x 15" LTR (73%)-11" x 17" LTR (64%)-11" x 17" STMT (50%)-Minimum (25%)■ EnlargeThe copy ratio set when making enlarged copies is as follows:-Maximum (800%)- (400%)-STMT 11" x 17" (200%)-LTR 11" x 17" (129%)-LGL 11" x 17" (121%)NOTE• The copy ratio of 800% is available only when the original is placed on the platen glass.
