1Changing the Copy Ratio (Copy Ratio) 1-31Basic Copying3 Press (Start).Copying starts.NOTE• To return the copy ratio to 100%, press “Direct.”• To cancel all settings and return the machine to the Standard mode, press (Reset).Automatically Setting the Copy Ratio Based on theOriginal and Copy Paper Sizes (Auto)The machine automatically selects the appropriate copy ratio based on the size of theoriginal and the selected paper. The available copy ratios are from 25% to 800% when theoriginal is placed on the platen glass, and from 25% to 400% when the original is placed inthe feeder.IMPORTANT• You cannot use the Auto mode with Automatic Paper Selection.• You cannot copy highly transparent originals, such as transparencies, in the Auto mode. Use thePreset Zoom or Zoom Designation modes.• To use the Auto mode, your originals must conform to a standard paper size.• The paper sizes that can be used with Auto are 11" x 17"/LGL/LTR/LTRR/STMT/STMTR. However,when copying STMT-size original using the platen glass, you need to set the “LTRR/STMT OriginalSelection” in Additional Functions. (See the Reference Guide.)NOTE• If an error occurs between the Auto copy ratio and the actual copy size, you can perform anadjustment with the Zoom Fine Adjustment function. (See the Reference Guide.)Original Copy
