Collating Copies (Finisher)1-44Basic Copying1Collating Copies (Finisher)The Finisher mode can be selected to collate the copies in various ways by pages or copysets.NOTE• When envelopes, tracing paper, transparencies, or labels are selected, Finisher functions cannotbe set.• When heavyweight paper is selected, the Staple or Hole Punch mode cannot be set.Below is a list of finishing functions and paper sizes available for each optional unit.*1 If Tray A is selected as a designated tray in the Additional Functions Common Settings Tray Designationscreen, Offset is applied. If it is not selected, Rotate is applied.*2 Stapling position cannot be selected.Optional units Offset RotateStapleHole PunchCorner Double Saddle StitchNone – LTR, LTRR,STMT, STMTR– – – –Finisher-J1 11"x17", LGL,LTR, LTRR,STMT–*211"x17":15 sheets;LGL: 20 sheets;LTR, LTRR:30 sheets– – –Inner 2way Tray-A1– LTR, LTRR,STMT, STMTR– – – –Copy Tray-F1Saddle Finisher-G1*111"x17", LGL,LTR, LTRR,STMT*1LTR, LTRR,STMT, STMTR11"x17", LGL:25 sheetsLTR, LTRR:50 sheets11"x17", LGL:25 sheetsLTR, LTRR:50 sheets11"x17",LTRR:10 sheets–Puncher Unit-K1 11"x17", LTR:3 holes;LGL, LTRR:2 holes
