1Changing the Copy Ratio (Copy Ratio) 1-33Basic Copying4 Press “Auto,” and press “Done.”The specified mode is set and the display returns to the Basic Features screen.5 Press (Start).Copying starts.NOTE• To return the copy ratio to 100%, press “Direct.”• To cancel the setting, press “Copy Ratio” “Auto” in this order.• If the original is placed on the platen glass, the zoom ratio appears when the feeder islowered, provided that the original size can be detected.• If the original is placed in the feeder, the zoom ratio appears when (Start) is pressed.• To cancel all settings and return the machine to the Standard mode, press (Reset).Slightly Reducing Images to Prevent the Original fromBeing Trimmed (Entire Image)When copying an original onto identically sized copy paper at a 100% ratio, the originalimage may be trimmed slightly on the copy. However, if you set the Entire Image mode, theimage is slightly reduced proportional to the paper and image size. As a result, the entireimage is copied without being trimmed.IMPORTANT• When the machine is operating in the Entire Image mode, you cannot use the Booklet, Frame Erase,Image Combination, Image Separation, Image Repeat, or Mirror Image modes.
