17TroubleshootingCannot print over a NetWarenetworkMake sure the printer's NetWare settings areconfigured correctly. In particular, make sure a validframe type is selected.Make sure the computer's NetWare settings areconfigured correctly.Check the following points.The printer's NetWare settings arenot configured correctly.The computer you are tryingto print from is not configuredcorrectly.The NetWare server and servicesare not configured correctly. 1.2.3.4.Make sure the NetWare file server is running.Make sure there is enough free disk space on theNetWare file server. Insufficient disk space mayprevent you from processing large print jobs.Start NWADMIN or PCONSOLE and confirm thatthe print service is configured correctly and the printqueue is available.If data transmission to a printer on another subnetfails, deactivate NCP burst mode in that printer'snetwork protocol settings.If the printer is used in queue server mode, specify" Other/Unknown" as the printer type.5.Phenomenon Cause Corrective Action(→"Configuring the Printer's NetWare NetworkSettings," User Manual)(→"Configuring NetWare Network Settings," UserManual)Cannot print over AppleTalk orBonjour networksActivate AppleTalk on the printer.Make sure the computer's AppleTalk settings areconfigured correctly.Due to the nature of Bonjour, you cannot print if theprinter is on another network behind a router. Makesure the computer and printer are on the samenetwork. For information about network settings, askyour network administrator.The AppleTalk protocol is notenabled on the printer.The computer you are tryingto print from is not configuredcorrectly.The computer and printer are noton the same network.(→"Configuring the Printer's AppleTalk NetworkSettings," User Manual)(→"Configuring the Destination for AppleTalkNetworks," User Manual)(→"Configuring the Destination for Bonjour Network,"User Manual)