Chapter 11-10*1 Indicates the default setting.*2 Indicates items that appear only when the appropriate optional equipment is attached.1.2.3.2 Timer Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i) 0017-5939T-1-2*1 Indicates the default setting.1.2.3.3 Adjustment/Cleaning (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i) 0017-5940T-1-3*1 Indicates the default setting.1.2.3.4 Report Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i) 0017-5941T-1-4Tray Designation*2 If the Optional Inner 2 Way Tray-E2 Is Attached:Tray A: Copy*1, Printer*1, Receive*1, Other*1Tray B: Copy*1, Printer*1, Receive*1, Other*1If the Optional Finisher-U2 and Additional Finisher Tray-C1 AreAttached:Tray A: Copy*1, Printer*1, Receive*1, Other*1Tray B: Copy*1, Printer*1, Receive*1, Other*1Stack Bypass Standard Settings On: Paper Size, Paper TypeOff*1Paper Feed Method Switch Stack Bypass, Paper Drawer 1, Paper Drawer 2*2, Paper Drawer 3*2,Paper Drawer 4*2: Speed*1, Print SideLanguage Switch On, Off*1Reversed Display (B/W) On, Off*1Error Display for Dirty Feeder On*1, OffData Compress. Ratio for Remote Scans High Ratio, Normal*1, Low RatioGamma Value for Remote Scans Gamma 1.0, Gamma 1.4, Gamma 1.8*1, Gamma 2.2Initialize Common Settings Initialize: Yes, NoItem SettingsDate & Time Settings Date and Time Setting (12 digit number)Time Zone Settings:GMT -12:00 to GMT +12:00;GMT -5:00*1Daylight Saving Time Settings: On, Off*1Auto Sleep Time Use Auto Sleep Time: On*1, Off3 to 30 minutes; 5*1Auto Clear Time 0 (Off) to 9 minutes, in one minute increments; 2 min.*1Item SettingsTransfer Roller Cleaning Press [Start].Drum Cleaning Press [Start].Fixing Unit Cleaning Cleaning Sheet Print, press [Start].Feeder Cleaning Press [Start].Special Mode M Standard*1, Low, Moderate, HighSpecial Mode N Manual (Medium, High), OffSpecial Mode O Stack Bypass: Medium, High, Off*1Drawer: Medium, High, Off*1Special Mode P Off*1, Medium, HighBond Special Fixing Mode On, Off*1Special Mode S Speed Priority 1, Speed Priority 2, Off*1Rotate Collate Adjustment Speed Priority 1*1, Speed Priority 2, Image PriorityAuto Adjustment for Dirty Feeder On*1, OffItem SettingsSettings TX Report: On, For Error Only*1, OffReport With TX Image: On*1, OffActivity ReportAuto Print: On*1, OffSend/Receive Separate: On, Off*1RX Report: On, For Error Only, Off*1Item Settings
