Chapter 1515-4215.15 Download (DOWNLOAD)15.15.1 Download 0017-6182The following parts of this unit can be upgraded by executing download mode using the service support tool (SST) (for more information, see the "Upgrading"section):Main unit- Flash ROM (system + boot) mounted on the image processor PCBAccessory- ROM mounted on the finisher controller PCB- ROM mounted on the PCL board15.16 Initialization of Set Value (CLEAR)15.16.1 Clear 0017-618315.17 Error Display (ERROR DISPLAY)15.17.1 Error Display 0017-8542An error code is displayed when a service error has occurred. The E code is displayed in the upper step, and the detail code is displayed the bottom step.Group Item ExplanationTEL & USER DATA Clears all user-registered and -set areas of telephone registration data and user data.(Telephone registration refers to the registration of codes on one-touch dialing,abbreviated dialing, and group dialing.)SERVICE DATA Clears the system dump list, except for counters and clear dates.COUNTER Clears the maintenance counter, parts counter and mode-specific counters.Initializes the counter (numerator) in the system dump list.TYPE Initializes user data and service data to suit specified destination settings.SOFT-CNT Not usedHST ACTIVITY Initializes the activity reportACCOUNT Clears print histories.JAM Clears the jam history.ERR Clear the error (error code) history.ALARM Clears the alarm history.ENVIROMENT Initializes the enviroment log data.CARD Clears department management information held in the controller before the cardreader is demounted.ERR E355 Not usedE719 Clears card reader errors.PWD Clears the system administrator's password.FILE SYSTEM*1 Delete unnecessary language files in the USB memory.FORMAT*1 USB MEMORY Format the USB memory. (This mode is used when the USB memory error is damagedand E744 occurs.)LICENSEDRIVENot usedCA-KEY Initializes an installed CA certification.ERDS-DAT The settings related to e-RDS are cleared to the factory settings.ALL Clears user and service data (except for some scan parameters and print parameters),and the counter setting/registration data in the system dump list, except for the printcount.*1 Only for the touch panel model.
