Chapter 1515-33Reference:At procedure (4) when indicating the license option, it indicates ' 001 1'. The last digit '1' shows that the license is active.After transmitting the license the last digit will change to '2', which means that the license has been transmitted.If the option is standard equipped, the last digit will indicate '3', which means that the license could not be transmitted.(8) Contact the dealer and inform the function inactive certificate key, serial number of the transmission origin device, and serial number of new transmiting device,which is necessary to transmit the license.Upon given information above, new license key will be issued, which the license could be registered to the new transmitting device.(9) Register the new license key to the transmitted device and confirm that the function is active.15.12 eRDS Parameter Settings (E-RDS)15.12.1 Settings Related to e-RDS 0017-6179Settings related to e-RDS are described below.T-15-2715.13 Display of Counter Information (COUNTER)15.13.1 Counters 0017-6180This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be used to gain rough measures of when to replace supplies. The counterset increments by one on counting each sheet of small-sized paper (up to A4/LTR) and by two on counting each sheet of large-sized paper (larger than A4/LTR).T-15-28Item DescriptionE-RDS SWITCH e-RDS OFF/ON setting (0:OFF / 1:ON)When used (ON), the counter information and error information are sentto UGW.Default: 0 (OFF)RGW-ADDRESS URL of UGWDefault: URL of actual UGWCharacter string length: 129 bytes (including NULL, one-byte codesonly)RGW-PORT Port No. of UGW Default: 443Setting range: 1 to 65535COM-TEST Execution of communication test An attempt is made to connect to UGW, judges whether connection issuccessful, and displays "COM-TEST OK" or "COMTEST NG" as the judgment result.COM-LOG Details of communication test resultThe log of errors in communication with UGW is displayed. The errorinformation includes the error occurrence time, error code, and details of the error.Maximum log count: 5Errorinformation length: Max. 128 characters (excluding NULL)Maintenance counter listItem Counter ExplanationTOTAL (Total counter) SERVICE1 Service total counter 1SERVICE2 Service total counter 2TTL Total counterCOPY Total copy counterPDL-PRT PDL print counterFAX-PRT Fax print counterREP-PRT Report print counter2-SIDE Double-sided copy/print counterSCAN Scan counterPICK-UP (Paper pickup counter) C1 Cassette 1 jam counterC2 Cassette 2 jam counterC3 Cassette 3 jam counterC4 Cassette 4 jam counterMF Manual feed tray pickup total counter2-SIDE Double-sided paper pickup total counterFEEDER (Feeder related counters) FEED Feeder pickup total counterDFOP-CNT ADF open/close hinge counter
