Canon iR2030 Series Service Manual

Also see for iR2018 Series: Service manual Brochure & specs Brochure & specs Easy operation guide Portable manual

Contents

Canon iR2030 Series Service Manual Manual pdf 295 page image

Chapter 1515-2915.7.2.7 <036: Left-end registration adjustment (cassette 2)> 0017-6163Adjust the left-end registration margin of paper picked from cassette 2. The larger the adjustment value, the wider the left-end margin of the image becomes.15.7.2.8 <037: Left-end registration adjustment (cassette 3)> 0017-6164Adjust the left-end registration margin of paper picked from cassette 3. The larger the adjustment value, the wider the left-end margin of the image becomes.15.7.2.9 <038: Left-end registration adjustment (cassette 4)> 0017-6165Adjust the left-end registration margin of paper picked from cassette 4. The larger the adjustment value, the wider the left-end margin of the image becomes.15.7.2.10 <039: Left-end registration adjustment (duplex unit)> 0017-6166Adjust the left-end registration margin of paper picked from a duplex unit. The larger the adjustment value, the wider the left-end margin of the image becomes.15.7.2.11 <040: Target fixing temperature adjustment (manual feed tray)> 0017-6167Lower the fixing temperature from the target temperature setting to reduce the chances of fixing offsets and curled or stuck delivered sheets occurring with paperpicked from a manual feed tray.15.7.2.12 <045: Fixing film speed change (manual feed tray)> 0017-6172Change the fixing film speed to reduce the chances of streaks appearing in the trailing edge of images caused by shocks from the fixing roller out of position whilepicking paper from a manual feed tray.15.7.2.13 <046: Fixing film speed change (cassette)> 0017-6173Change the fixing film speed to reduce the chances of streaks appearing in the trailing edge of images caused by shocks from the fixing roller out of position whilepicking paper from a cassette.15.7.2.14 <053: Margin adjustment at the leading edge of the copy> 0017-6168Adjust the margin at the leading edge of the copy. Increasing the value makes the margin at the leading edge larger.15.7.2.15 <054: Margin adjustment at the trailing edge of the copy> 0017-6169Adjust the margin at the trailing edge of the copy. Increasing the value makes the margin at the trailing edge larger.15.7.2.16 <055: Margin adjustment at the right edge of the copy> 0017-6170Adjust the margin at the right edge of the copy. Increasing the value makes the margin at the right edge larger.15.7.2.17 <056: Margin adjustment at the left edge of the copy> 0017-6171Adjust the margin at the left edge of the copy. Increasing the value makes the margin at the left edge larger.15.7.2.18 <058:: Adjustment of the registration loop volume (Manual feed tray)> 0017-8644If there is a registration loop noise and abrasion while feeding the paper from the manual feed tray, registration loop noise and abrasion could be reduced by adjustingthe volume of the registration loop. By making the value larger, loop volume will become bigger.15.7.2.19 <059:Adjustment of the registration loop volume. (Cassette)> 0017-8645If there is a registration loop noise and abrasion while feeding the paper from the cassette, registration loop noise and abrasion could be reduced by adjusting thevolume of the registration loop. By making the value larger, loop volume will become bigger.15.7.2.20 <060:Adjustment of the registration loop volume (Option cassette)> 0017-8646If there is a registration loop noise and abrasion while feeding the paper from the option cassette, registration loop noise and abrasion could be reduced by adjustingthe volume of the registration loop. By making the value larger, loop volume will become bigger.15.7.2.21 <061:Adjustment of the registration loop volume. (Duplex unit)> 0017-8648If there is a registration loop noise and abrasion while feeding the paper from the duplex unit, registration loop noise and abrasion could be reduced by adjustingthe volume of the registration loop. By making the value larger, loop volume will become bigger.15.7.2.22 <062:Temperature adjustment UP/DOWN mode. (For plain paper)> 0017-8649For plain paper relation, the volume of the temperature adjustment offset could be changed by 5 deg C at a time to aim the fixed temperature.For plain paper relation : Normal, Normal Lo, rough paper Lo, thin post card, and OHP mode.0 to 6: -35 to -5 deg C (1unit=5deg C)7: 0 deg C8 to 14: +5 to +35 deg C (1unit=5deg C)15.7.2.23 <063:Temperature adjustment UP/DOWN mode. (For rough paper)> 0017-8650For rough paper relation, the volume of the temperature adjustment offset could be changed by 5 deg C at a time to aim the fixed temperature.For rough paper relation: rough paper, super rough paper, super rough paper H, post card, post card H, and envelope mode.0 to 6: -35 to -5 deg C (1unit=5deg C)7: 0 deg C8 to 14: +5 to +35 deg C (1unit=5deg C)15.7.2.24 <064:Mode for preventing the temperature rise of the end > 0017-8651Set when the fixed film squeaks. Lower the target fixing temperatue and extend sheet-to-sheet time except A4/A3/11X17/LTR size.0: Normal1 to 5: Mode for responding film squeak. (reference to the table below)T-15-25Setting Print temperature control Sheet-to-sheet temperature control Sheet-to-sheet time1 Target temperature-10 deg C Print temperature control -20 deg C 0 sec extension2 Target temperature-20 deg C Print temperature control -20 deg C 0 sec extension3 Target temperature-10 deg C Print temperature control -20 deg C 10 sec extension