Chapter 1515-2715.7.1.3 SSSW-SW1515.7.1.3.1 List of Functions0017-6152T-15-2315.7.1.3.2 Detailed Discussions of Bit 00017-6153Select whether to inhibit automatic delivery tray replacement while running jobs with an inner two-way tray mounted in position. Select "Enable" to inhibit auto-matic tray replacement.15.7.1.3.3 Detailed Discussions of Bit 10017-6154Select whether to halt stapling job when a finisher installed has run out of staples. Select "Enable" to halt staple jobs when the finisher has run out of staples.15.7.1.3.4 Detailed Discussions of Bit 20017-6155Select whether to display a tray full message when the maximum allowable stapled document count is exceeded with a finisher installed. Select "Enable" not todisplay the message.15.7.1.3.5 Detailed Discussions of Bit 30017-8532Select whether split recording is to be enabled when text data such as a header and body text is recorded. Selecting "Set" may split text data when a small paper sizesuch as A5 is selected. In this case, a page may be split in the middle of a character string.15.7.1.4 SSSW-SW1815.7.1.4.1 List of Functions0017-8533T-15-2415.7.1.4.2 Detailed Discussions of Bit 00017-8534If there is no progress after shifting the target figure of the temperature adjustment using "Temperature Adjustment UP/DOWN Mode", # PRINTER> Numeric>Parameter 62, 63, cancel the inner limit of the fixed temperature adjustment.Bit Function 1 00 Inhibit automatic delivery tray replacement while runningjobsEnable Disable1 Halt stapling job when out of staples Enable Disable2 Inhibit tray full indication while the stapled documentcount is exceededEnable Disable3 IFAX Permission of split recording of text data Enable Disable4 Not used - -5 Not used - -6 Not used - -7 Not used - -Bit Function 1 00 Limit temperature of temperature adjustment Enable Disable1 Shift of the temperature adjustment when at auto duplex Enable Disable2 Thin post card mode Enable Disable3 Not used - -4 Not used - -5 Not used - -6 Not used - -7 Not used - -
