Canon XL1 Instruction Manual

Also see for XL 1: Specifications Brochure Instructions Manual Brochure & specs

Contents

Canon XL1 Instruction Manual Manual pdf 8 page image

Preparation8E Any lens bearing the mark can be used with this camcorder.1. Remove the dust cap from the lens and the body cap from the camcorder.2. Align the red dot on the camera body with the mount positioning point (the red dot) on thelens, then turn the lens clockwise until it clicks and locks into place.Mounting the lens1. Slide and hold the LENS RELEASE switch and turn the lens counter-clockwise until itstops. Then, remove the lens from the camera body.2. When you are not using the lens or camera, be sure to replace the dust cap and body cap.Removing the lensLENS RELEASEMounting and Removing XL Lenses