RecordingE42Setting the Self-Timer1. Press the wireless controller’s SELF TIMER button.• SELF TIMER appears in the viewfinder.2 Press the wireless controller’s START/STOP button.• The camera starts to record after a 2 second countdown period (or after 10 seconds if you press thestart/stop button on the camera). The time remaining counts down in the viewfinder (e.g. “5 sec”).• SELF TIMER disappears from the viewfinder when recording begins.3. Press the START/STOP button to end recording.• In photo mode, set the self-timer in a similar way, but press the PHOTO button in place of thestart/stop button. The focus and exposure are set before the countdown is complete and the greenmark is displayed.Notes:• Initially the tally lamps flash once a second, then just before recording starts they flash more quickly for afew seconds before the camera starts to record.• To cancel the self-timer press the SELF TIMER button once more before recording. Once the countdownhas begun, press the SELF TIMER button to turn it off.• Cancel the self-timer at any stage by turning the power off or pressing the STANDBY button.• If you press the SELF TIMER button when the recording displays have been turned off (p. 24), the selftimer display does not appear in the viewfinder, until you press the start/stop button to start thecountdown.PHOTOSELF TIMER W TZOOMSTART/STOP
