Canon XL1 Instruction Manual

Also see for XL 1: Specifications Brochure Instructions Manual Brochure & specs

Contents

Canon XL1 Instruction Manual Manual pdf 56 page image

PlaybackE56Connections for Playback on a TV ScreenYou can connect the camera to a TV or VCR in order to play back your recordings. You will need to attacha power source to the camera (see p. 13).See your TV or VCR instruction manual for further details.• Use the S-150 S-video Cable to connect the S-video terminal d. Use the STV-150 Stereo Video Cable, toconnect the AUDIO terminals. Connect the white plug to the white AUDIO terminal 7 (left). Connect thered plug to the red AUDIO terminal 9 (right). Do not connect the yellow plug.• Set the TV/VIDEO selector on the television to VIDEO.• If you are connecting the camera to a VCR, set the input selector on the VCR to LINE.RLVLRSAUDIO 1S-VIDEOAUDIOVIDEOSTV-150 Stereo Video CableS-150 S-video CableIf your TV (or VCR) has an S-video input terminalIf your TV (or VCR) has audio/video input terminalsRLAUDIOVIDEOSTV-150 Stereo Video CableVLRSAUDIO 1• Connect the camera using the STV-150 Stereo Video Cable. Connect the white plug to the white audioterminal 7 (left). Connect the red plug to the red audio terminal 9 (right). Connect the yellow plug tothe yellow video terminal 0.• Set the TV/VIDEO selector on the television to VIDEO.• If you are connecting the camera to a VCR, set the input selector on the VCR to LINE.Note:• If you are going to use the TV as a monitor while you are shooting, remember to keep the TV volumeturned down as long as the camera’s audio terminals are connected to prevent feedback.If your TV is already hooked up to a VCR, you can connect the camera to the VCR instead of the TV.Follow the instructions above.