82 VideoCapturing Video Snapshot Scenes from a MovieCapture a series of video snapshot scenes from a movie you have pre-viously recorded.1 Play back the movie containing the scene you want to capture.2 Press at the point you want to capture.• The camcorder captures a video snapshot scene (the blue frameserves as a visual progress bar) and then automatically changes toplayback pause mode.• You can change the length of video snapshot scenes with the[Video Snapshot Length] setting.• When the camcorder finishes capturing, the screen will momentarilyturn black as if a camera shutter had released.NOTES• A video snapshot scene can be captured only during playback; it can-not be captured during playback pause mode.• / The captured video snapshot scene is saved to the samememory that contains the movie.• Video snapshot scenes cannot be captured from any of the followingtypes of movies.- Movies shorter than 1 second- Scenes that were edited using the software on the supplied softwareImageMixer 3 SE and were then written back to the memory.• When the source scene is itself a video snapshot scene, you may notbe able to capture a video snapshot scene depending on the length ofthe source scene and the length currently selected for video snapshotscenes.• When you start capturing a video snapshot scene less than 1 secondfrom the end of the scene, the video snapshot scene will be capturedstarting from the beginning of the following scene.• During the playback of video snapshot scenes captured from a previ-ously recorded movie, you may notice some anomalies in the picture/sound at the point where the playback switches to a new scene.Operating modes:START/STOPCOPYDownloaded From VideoCamera-Manual.com Manuals
