Canon Super G3 Fax Board-AF1 Service Manual

Canon Super G3 Fax Board-AF1 Service Manual Manual pdf 59 page image

Chapter 55-175.7.1.4 DTMF Transmission Test 0025-3165Of the items indicated below, press one; in response, the DC circuit will be closed and the selected DTMF signal will be transmitted using the DTMF transmissionfunction of the modem. You can also monitor the transmission signal by listening to the speaker. To stop the operation and to end test mode, press the key.F-5-101) From the items indicated on the screen, select the item you want to test; then, press the key on keypad that corresponds to the DTMF signal to test.5.7.1.5 V.34 G3 Signal Transmission Test (V34G3Tx) 0025-3166Select the transmission speed you want to test, and then select a modulation speed (baud rate); in response, the V.34 G3 transmission signal will be transmitted tothe telephone line terminal and the speaker. To stop the operation and to end test mode, press the key.F-5-111) Select 'SPEED', and then select the speed you want to test using the Up/Down key.2) Select the baud rate you want to test.'SHORT' is not currently supported.<1/1> ReportSssw Menu Num Ncu Type ISDN Print Clear TestOKLONGSHORT0 1 2 3 4 5 6 7 8 9 * #0 1 2 3 4 5 6 7 8 9 * #<1/1> ReportSssw Menu Num Ncu Type ISDN Print Clear TestOKSPEED 33600bps3429baud3200baud3000baud2800baud2743baud2400baud