Canon Super G3 Fax Board-AF1 Service Manual

Canon Super G3 Fax Board-AF1 Service Manual Manual pdf 56 page image

Chapter 55-145.6 Initialization of Set Value (CLEAR)5.6.1 Overview 0025-3160You can select and initialize data by making the following selections; as a result, settings and various parameter values will be reset to the factory settings.T-5-21*1: If the model is capable of storing addresses other than fax addresses, the telephone number data will not be deleted upon execution of 'TEL' and 'ALL'.To remove the telephone number data, use the host machine's service mode: COPIER > FUNCTION > CLEAR > ADRS-BK.*2: When 'ALL' is executed, the values suited to the destination of the machine will be stored under 'TYPE'; in the case of Japan, 'standard'.Item Data to be initializedTEL telephone number registration data (*1)USSW SW user data and data registered under Service Mode #1 through #3.of user data, the memory management data will not be deleted.image data collected in memory will not be deleted.SRV SW user data and data in Service Mode #1 through #3, #7.NCU data under Service Mode #4.SRV DATA system dump list data.REPORT communication control report data.ALL all settings/registered data (*1) except data under Service Mode #5 TYPE (*2).COUNTER number of prints, number of sheets read.ISDN The ISDN related settings of the FAX service mode are initialized.