Canon Super G3 Fax Board-AF1 Service Manual

Canon Super G3 Fax Board-AF1 Service Manual Manual pdf 44 page image

Chapter 55-25.2 Setting of Bit Switch (SSSW)5.2.1 Outline5.2.1.1 Bit Switch Composition 0025-3086The registration/setup items of the switch are set according to the positions of its 8 bits; the bit switch shown on the display is as follows, each bit being either 0 or 1:F-5-3F-5-45.2.2 SSSW-SW015.2.2.1 Functional Construction 0025-3087T-5-15.2.2.2 Detailed Discussions of Bit 0 0025-3088Selects whether or not service error codes are output.When output is selected, service error codes are displayed and in reports.5.2.2.3 Detailed Discussions of Bit 1 0025-3089Selects whether or not error dump lists are output.When selecting 'output', the error transmission report and the reception result report at the time of error to which the error dump list is attached are output.Do not change service data identified as "not used"; they are set as initial settings.Bit Function 1 00 service error code output not output1 error dump list output not output2 not used - -3 not used - -4 not used - -5 not used - -6 not used - -7 not used - -SW01 0 0 0 0 0 0 0 0Bit 7 Bit 0<1/7> ReportSssw Menu Num Ncu Type ISDN Print Clear Test0 0 0 0 0 0 0 01 0 0 0 0 0 0 00 0 0 0 0 0 0 01 0 0 0 0 0 0 00 0 0 0 0 0 0 01 0 0 0 0 0 0 0SW01SW02SW03SW04SW05SW060 0 0 0 0 0 0 01 0 0 0 0 0 0 0SW07SW08OK