Canon PIXMA MX870 Network Setup Manual

Also see for PIXMA MX350: Brochure User manual Manual Installation manual Install manual

Contents

Canon PIXMA MX870 Network Setup Manual Manual pdf 8 page image

AIs the privacy separator feature enabled on the access point?Disable the privacy separator feature.Check 5Check 4For details on how to change the settings of the access point, refer to the manual supplied with theaccess point or contact its manufacturer.•For details on how to check the settings of the access point, refer to the manual supplied with theaccess point or contact its manufacturer.•When obtaining an IP address automatically, make sure that the DHCP function of thenetwork device (router, access point, etc.) is active.For details on how to check settings of the network device, refer to the manual supplied with thenetwork device or contact its manufacturer.•Activate the DHCP function of the network device, then click Update (A).For details on how to change settings of the network device, refer to the manual supplied with thenetwork device or contact its manufacturer.•GlossaryA function to restrict communication of network devices with specific IP addresses, preventing them fromconnecting to the network.IP address filtering•A function to prevent communication between multiple wireless devices (such as computers and printers)connected to an access point.Privacy separator feature•DHCP function•A function to automatically assign required information (IP address, etc.) to computers, printers or otherdevices connected to the network.(* Wireless connection only)CheckCheck Printer Settings dialog box is DisplayedThe message appears when the machine cannot bedetected.Is the machine connected to a network?To confirm the connection status, press the Setup button, then using the { } [ ] and OKbuttons, select Device settings > LAN settings > Confirm LAN settings > WLAN setting list orLAN setting list. Make sure that Connection is set to Active.•For a wireless connection, make sure that you followCheck 1, 2, 3, 4, 5 and 6 of "Connection Checklist" onpage 12, then click Back (A).Check 1Check 2If the machine is not connected to a network, perform setup again by following theprocedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printedmanual: Getting Started.Is the IP filtering feature enabled on the network device (router, access point, etc.)?Check 3For details on how to check settings of the network device, refer to the manual supplied with thenetwork device or contact its manufacturer.•Set the network device to accept the IP address of the machine.For details on how to change settings of the network device, refer to the manual supplied with thenetwork device or contact its manufacturer.•To check the IP address of the machine, press the Setup button, then using the { } [ ] andOK buttons, select Device settings > LAN settings > Confirm LAN settings > WLAN settinglist or LAN setting list, then check IP address.•For a wired connection, make sure that you followCheck 1, 2, 3, 7 and 8 of "Connection Checklist" onpage 12, then click Back (A).Proceed with the setup.IP address•A numerical identification assigned to each computer or network device connected to a network.