Canon LEGRIA HFM36 Instruction Manual

Also see for LEGRIA HF M300: Firmware update procedure

Contents

Canon LEGRIA HFM36 Instruction Manual Manual pdf 79 page image

Video  79To display the audio level indicatorUsually, the audio level indicator will be displayed only after activatingthe manual adjustment of the audio recording level. You can choose todisplay it also when the audio level is adjusted automatically.NOTES• When the audio level meter reaches the red point (0 dB), the sound maybe distorted.• If the audio level is too high and the sound gets distorted, activate themicrophone attenuator with the 7 8 [Microphone Attenuator] set-ting.• We recommend using headphones to check the sound level whileadjusting the audio recording level or when the microphone attenuatoris activated.Using HeadphonesUse headphones for playback or to check the audio level while record-ing. The headphones are connected to the AV OUT/X terminal, whichis used for both the headphones and the audio/video output. Beforeconnecting the headphones, follow the procedure below to change thefunction of the terminal from AV output to X (headphones) output.* Headphones can be used also in mode but the function of the terminal can-not be changed in this mode. Change the setting in advance in one of the otheroperating modes.[FUNC.] 8 [c Mic. Level] 8 [z Automatic] 8[Audio Level Indicator] 8 [a]Operating modes: *