Canon LEGRIA HFM36 Instruction Manual

Also see for LEGRIA HF M300: Firmware update procedure

Contents

Canon LEGRIA HFM36 Instruction Manual Manual pdf 170 page image

170  Additional InformationThis photo cannot be displayed- You may not be able to display photos taken with other devices or image files created oredited on a computer and then transferred to a memory card connected to the computer.This B photo could not be deleted- Protected photos (B) cannot be deleted. Remove the protection (0 110).This scene was recorded using another device and cannot be added to the playlist.- Scenes recorded using another device and then transferred to a memory card connected to acomputer cannot be added to the playlist.To record video on this memory card, it is recommended to use only the XP+/SP/LP recordingmodes- Movies may not be recorded correctly on this memory card if the recording mode is set toMXP or FXP mode (0 56).To use this function change the camcorder's mode from 5 to y- You pressed a button that cannot be used in mode. Set the mode switch to y to setthe camcorder to flexible recording mode.Too many photos. Disconnect the USB cable.- Disconnect the USB cable. Try using a memory card reader or decrease the number of photoson the memory card to fewer than 2,500 photos (printers, Windows computers), or 1,000photos (Macintosh computers).- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, andrestore the connection after a short while.b Total play time is too long- The playlist cannot be converted when its total playback time exceeds 2 hours and 30 min-utes. Reduce the number of scenes in the playlist.Unable to recognize the data- You transferred to a memory card connected to the computer video files that were recordedwith another device using a different television system (NTSC). Play back the recordings withthe device originally used to record them.Unable to recover data- Could not recover a corrupted file. Save your recordings (0 123) and initialize the memoryusing the [Complete Initialization] option (0 37).Direct Print Related MessagesData transfer error- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn theprinter back on and reconnect the USB cable.- You attempted to print from a memory card that contains a large number of photos. Reducethe number of photos.