44 Dual Shot Mode2 Touch the zoom controls to operatethe zoom.Touch anywhere within the Q area tozoom out or anywhere within the P areato zoom in. Touch closer to the center fora slow zoom ([Speed 1]); touch closer tothe e/d icons for faster zooms ([Speed 3]).3 Touch [a] to hide the zoom controls.NOTES• Keep at least 1 m away from the subject. At full wide angle, you canfocus on a subject as close as 1 cm.• In or mode, you can also set 7/8 8[Zoom Speed] to one of three constant speeds (3 is the fastest, 1 theslowest).• When [Zoom Speed] is set to [I Variable]:- When you use the P and Q buttons on the wireless controller, thezoom speed will be constant at [J Speed 3].- The zoom speed will be faster in record pause mode than whenactually recording, except when pre-recording (0 62) is activated.• See Specifications (0 188) for notes about this function when therecording program is set to [r Underwater] or [s Surface].Quick Start FunctionWhen you close the LCD panel with the camcorder on, the camcorderenters the standby mode. In standby mode the camcorder consumesonly about 1/3 the power used when recording, saving energy whenyou are using a battery pack. Additionally, when you open the LCDpanel, the camcorder is ready to start recording in approximately1 second*, allowing you to record the subject right away.* The actual time required varies depending on the shooting conditions.1 With the camcorder on and in a recording mode, close the LCDpanel.A beep will sound and the green ON/OFF (CHG) indicator will changeto orange to indicate the camcorder entered standby mode.Operating modes:
