112 PhotosPrinting PhotosPrinting Photos (Direct Print)The camcorder can be connected to any PictBridge-compatibleprinter. You can mark in advance the photos you want to print and setthe desired number of copies as a print order (0 114).Canon printers: SELPHY printers of the CP,DS and ES series and inkjet printers carry-ing the PictBridge logo.Connecting the Camcorder to the Printer1 In single photo view, select a photo you want to print.2 Turn on the printer.3 Connect the camcorder to the printer using the supplied USBcable.• Connection D. Refer to Connection Diagrams (0 119).• V appears and changes to D.IMPORTANT• If V continues to flash (for more than 1 minute) or if D does notappear, the camcorder is not correctly connected to the printer. In suchcase, disconnect the USB cable and turn off the camcorder and theprinter. After a short while, turn them on again, set the camcorder tomode and restore the connection.• During the following operations, even if you connect a printer to thecamcorder it will not be recognized.- Deleting all photos- Removing all print ordersNOTES• will appear for photos that cannot be printed.• We recommend powering the camcorder using the compact poweradapter.• Refer also to the printer’s instruction manual.Operating modes:
