Using Up Toner0U6X-0H2Symptoms like the following appear on printouts when toner runs low.Streaks appear Partially faded Uneven densityPerform the following procedure when any of the above symptoms appears. They will allow you to use up all of thetoner in the toner cartridge. Performing this procedure may allow you to get fine print again for some time until thetoner is used up. If the symptom does not improve after you perform the following procedure, replace the tonercartridge ( How to Replace Toner Cartridges(P. 428) ). Before starting the procedure, read the precautions given inMaintenance and Inspections(P. 9) and Consumables(P. 10) .1 Open the front cover while holding down on the button.2 Remove the toner cartridge.3 Shake the toner cartridge five or six times as shown below to evenly distribute thetoner inside the cartridge.Maintenance426