Starting Remote UI0U6X-09JTo operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI.Check the IP address set to the machine in advance ( Viewing Network Settings(P. 180) ). If you have anyquestions, ask your Network Administrator.1 Start the Web browser.2 Enter "http://(the IP address of the machine)/" in the address field, and press the[ENTER] key.● If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://[fe80::2e9e:fcff:fe4e:dbce]/).If a security alert is displayed● A security alert may be displayed when the Remote UI communication is encrypted ( Enabling SSLEncrypted Communication for the Remote UI(P. 255) ). When certificate settings or SSL settings have noerrors, continue browsing the Web site.3 Log on to the Remote UI.When the Department ID Management is disabledSelect [System Manager Mode] or [General User Mode].[System Manager Mode]You can perform all the Remote UI operations and settings. Enter the appropriate ID in [System ManagerID] and PIN in [System Manager PIN] ( Setting the System Manager ID(P. 226) ). If [System ManagerID] is not set, you do not need to input anything.Using Remote UI290
