[*] keyPress to switch the type of text that is entered.NFC (Near Field Communication) markYou can also use functions such as printing by waving a smartphone or similar device with Canon MobileApplication installed over this mark. Connecting by a Touch on the Machine (NFC)(P. 145)Energy Saver keyPress to put the machine into sleep mode. The display is turned OFF and the Main Power indicator lights upwhen the machine is in sleep mode. Press the key again to exit sleep mode. Entering Sleep Mode(P. 66)Status Monitor keyPress to check the status of printing, to view the usage history, or to view the network settings such as the IPaddress of the machine. You can also check the status of the machine, such as the remaining amounts ofpaper and the amount remaining in the toner cartridge, or whether any errors occurred. Display(P. 27)[ID] keyPress after entering the ID and PIN to log on when Department ID Management is enabled. After you finishusing the machine, press this key again to log off. Logging on to the Machine(P. 36)Clear keyPress to delete the entered numbers and text.Counter Check keyPress to view the counter values of printouts, as well as the serial number of the machine and the machineconfiguration. Viewing the Counter Value(P. 444) Display(P. 27)Stop keyPress to cancel the current operation, including printing.[#] keyPress to enter symbols such as "@" or "/".Processing/Data indicatorBlinks while printing or other operation is being performed. Lights up when there are documents waiting tobe processed.Wi-Fi indicatorLights up when the machine is connected to wireless LAN.Error indicatorBlinks or lights up when an error such as a paper jam occurs.Basic Operations25
