Connection failed. Check the PSK settings.The network key (PSK) of a wireless router to be connected is not set to the machine correctly.● Check the network key (PSK) of the wireless router, and set it to the machine again.Checking the SSID and Network Key(P. 169)Setting Up Connection by Selecting a Wireless Router(P. 162)Setting Up Connection by Specifying Detailed Settings(P. 165)● If the problem persists even after checking the network key, check whether the machine is properlyinstalled and ready to connect to the network.Installation/Settings Problems(P. 396)Could not connect using Access Point Mode.Connection in Access Point Mode failed due to an error.● Wait a few moments and try again. If you still cannot connect, try switching the machine off briefly.Make Direct Connection (Access Point Mode)(P. 143)Could not connect using the wireless LAN.Wireless LAN communication failed due to an error.● Wait for a while, and set again. If you still cannot get connection, turn OFF the machine and then restart it.Could not connect using the wireless LAN. Turn the main power OFF and ON,then configure the settings again.A connection failed due to an error while setting wireless LAN connection.● Restart the machine and set again.● If the problem persists even after restarting the machine, check whether the machine is properly installedand ready to connect to the network.Installation/Settings Problems(P. 396)● If the problem persists even after checking the wireless LAN connection, check the security settings of thewireless router.Could not connect using WPS. Wait a moment, then configure the settingsagain.When automatic setting with WPS was attempted, the connection failed due to an error.● Wait for a while, and set again. If the problem persists, check whether the wireless router supports WPS.If WPS is supported:Troubleshooting385
