[Acquire Printer Management Information from Host]Select the check box to enable monitoring of the printer management information of the machine via SNMP.To disable monitoring of the printer management information, clear the check box.8 Click [OK].9 Restart the machine.● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.Disabling both SNMPv1 and SNMPv3● If both versions of SNMP are disabled, some of the functions of the machine become unavailable, such asobtaining machine information via the printer driver.Using the operation panel● You can enable or disable the SNMP settings from SNMP Settings(P. 317)Enabling Both SNMPv1 and SNMPv3● If both versions of SNMP are enabled, it is recommended that MIB access permission in SNMPv1 be set to[Read Only]. MIB access permission can be set independently in SNMPv1 and SNMPv3 (and for each user inSNMPv3). Selecting [Read/Write] (full access permission) in SNMPv1 negates the robust security featuresthat characterize SNMPv3 because most of the machine settings can then be controlled with SNMPv1.LINKSEnabling SSL Encrypted Communication for the Remote UI(P. 255)Network214
