Canon LBP253 Series User Manual

Contents

Canon LBP253 Series User Manual Manual pdf 166 page image

From a Computer8 Register the generated PIN code to the wireless router.● Register the PIN code on the setup screen displayed in step 1.● The PIN code must be registered within 10 minutes after tapping in step 7.If an error message is displayed during setup● Tap and return to step 6.From the Operation Panel9 Check that the Wi-Fi indicator is blinking on the operation panel.● The Wi-Fi indicator blinks when a wireless router is detected.● When the setup is completed, the screen below is displayed, and approximately 2 seconds later, the Wi-Fiindicator lights up.● Wait approximately 2 minutes until the IP address settings of the machine are completed.Signal strength● When more than one wireless router is available for connection, the machine connects to the device withthe strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication).Network160