◼ Push Button ModeFind the WPS mark shown below on the package of your wireless router. Also make sure that there is a WPS button onyour networking device. Setting Up Connection Using WPS Push Button Mode(P. 157)◼ PIN Code ModeSome WPS routers do not support the push button mode. If WPS PIN code mode is mentioned on the package or inthe instruction manuals of your networking device, set up the connection by entering the PIN code. Setting UpConnection Using WPS PIN Code Mode(P. 159)● If the wireless router is set to use WEP authentication, you may not be able to set up connection using WPS.Manually Setting Up ConnectionWhen manually setting up a wireless connection, you can either select a wireless router or manually enter the requiredinformation. Regardless of the method, make sure that you have the required setup information, including the SSIDand network key ( Checking the SSID and Network Key(P. 169) ).◼ Selecting a Wireless RouterSelect this setup option if you need to manually set up the connection but want to complete the setup as easily aspossible. Setting Up Connection by Selecting a Wireless Router(P. 162)◼ Manually Entering the Setup InformationIf you want to specify security settings in detail, such as authentication and encryption settings, manually enter theSSID and network key to set up the connection. Setting Up Connection by Specifying Detailed Settings(P. 165)LINKSConnecting to a Network(P. 151)Selecting Wired LAN or Wireless LAN(P. 153)Network156
