Entering Sleep Mode2754-00YThe sleep mode function reduces the amount of power consumed by the machine by temporarily stopping someinternal operations. You can set up the machine to enter sleep mode automatically when it remains idle for a certainlength of time. The factory default setting for the amount of time that elapses before the machine enters sleep modeis 1 minute. We recommend using the factory default setting to save the most power. If you want to change theamount of time that elapses before the machine enters sleep mode, follow the procedure below in the Printer StatusWindow.Situations in which the machine does not enter sleep mode● When the machine is in operation● When the Job indicator is lit up or blinking● When the machine is performing an operation such as adjustment or cleaning● When a paper jam occursChanging the Auto Sleep Time Value1 Select the machine by clicking in the system tray.2 Select [Options] [Device Settings] [Sleep Settings].3 Make sleep mode settings, and click [OK].[ Auto Sleep After]Specify the length of time after which the machine enters sleep mode. You can select from 1 to 30 minutes.Basic Operations40
