Canon LASERBASE MF3110 User Manual

Also see for LASERBASE MF3110: Service manual Service manual

Contents

Canon LASERBASE MF3110 User Manual Manual pdf 55 page image

9-7Troubleshooting9LCD MessagesThe following messages are displayed in the LCD when the machine performs a function or if itencounters an error.CHECK PAPER SIZECause The size of the paper in the cassette or multi-purpose feeder is different from that of the paperspecified in of the Menu.Remedy Load the correct paper size or change in of the Menu. (See"Loading Paper," on p. 2-3, or "Specifying the Paper Size," on p. 2-8.)Then reset the machine by opening the front cover and then closing it.CHECK PRINTERCause A problem has occurred in the printer.Remedy Reset the machine by opening the front cover and then closing it. If the message persists, unplug themachine from the power supply and contact your local authorized Canon dealer or the Canon helpline.CHECK PRINTER COVERCause The front cover is not closed completely.Remedy Check the front cover, and make sure that it is completely closed.INSTALL CARTRIDGECause The cartridge is not installed or not installed correctly.Remedy Install the cartridge correctly. (See "Replacing the Cartridge," on p. 8-5.)MEMORY FULLCause 1 The machine's memory is full because the collate copy or 2 on 1 copy function was set when a largedocument is loaded.Remedy Divide the document and copy each part separately.Cause 2 You tried to reserve more than 11 copy jobs.Remedy The machine can store up to 10 copy jobs in memory. Wait until the current copy job completes, oruse [Status Monitor] to delete the reserved copy jobs in memory.