Canon LASERBASE MF3110 User Manual

Also see for LASERBASE MF3110: Service manual Service manual

Contents

Canon LASERBASE MF3110 User Manual Manual pdf 31 page image

5-2Copying5Setting Enlarging/ReducingYou can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios.Enlarging/Reducing Using Preset Copy Ratios1 Press [Enlarge/Reduce].2 Press [ (-)] or [ (+)] to select the copy ratio ➞ press [OK].You can select from the following:- 200% MAX.- 141% A5 ➞ A4- 100%- 70% A4 ➞ A5- 50% MIN.NOTE• If the setting of menu in the Menu is set to or , thepreset copy ratios will be as follows:INCH: 50%, 64%, 78%, 100%, 129% and 200%;AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141% and 200%.• Enlarging or reducing using preset copy ratio is not available with the 2 on 1 copy function.• To return the copy ratio to 100%, press [Enlarge/Reduce] several times to display ratio ➞ press[OK].You can also return the ratio to 100% using a custom copy ratio. (See "Enlarging/Reducing Using Custom CopyRatios" below.)Enlarging/Reducing Using Custom Copy Ratios1 Press [Enlarge/Reduce] twice.2 Use the numeric buttons to enter the copy ratio ➞ press [OK].• You can enter the copy ratio from 50% to 200%, selectable in 1% increments.• Even after entering the copy ratio, you can use [ (-)] or [ (+)] to adjust the copy ratio. To increase the copyratio, press [ (+)]. To decrease the copy ratio, press [ (-)].NOTE• Enlarging or reducing using a custom copy ratio is not available with the 2 on 1 copy function.• To return the copy ratio to 100%, press [Enlarge/Reduce] several times to display ratio ➞ press[OK].You can also return the ratio to 100% using a preset copy ratio. (See "Enlarging/Reducing Using Preset CopyRatios" above.)➞Z O O M 5 0 - 2 0 0 %- 8 0 % +8 0 % A 4T E X T / P H O T O 01