98Recording from a Tape in the Camcorder1. Play back the tape.2. Press the PHOTO button halfway when the scene you wish to recordappears.• The camcorder pauses playback. The remaining image capacity and other informationappear.• When you press the PHOTO button on the wireless controller, recording startsimmediately.3. Press the PHOTO button fully.• The card access indicator flashes.• You can also record a still image by pressing the PHOTO button fully when the tape isin playback pause mode.Recording from Other Video DevicesYou can record images from devices connected via the S-video terminal or AV terminal(analog line-in function), or via the DV terminal as still images on a memory card. Forconnecting instructions, refer to page 35 and 82.1. Set the camcorder to PLAY (VCR) mode.• If a cassette is loaded, make sure that the tape is stopped.• When recording via the AV terminal, make sure that “AV \DV” is displayed on thescreen. When recording via the DV terminal, make sure that “AV \DV” is notdisplayed. Change the setting as necessary ( 87).2. Connected device: Load a recorded cassette and play back the tape.3. Press the PHOTO button halfway when the scene you wish to recordappears.• The still image, remaining image capacity and other information appear.• When you press the PHOTO button on the wireless controller, recording startsimmediately.4. Press the PHOTO button fully.The card access indicator flashes.CARD PLAYCARD CAMERAPLAY (VCR)CAMERACARD PLAYCARD CAMERAPLAY (VCR)CAMERA
