61Advanced Functions -RecordingEUsing Headphones during RecordingThe headphones terminal also serves as AV terminal. Headphones can only be usedwhen "H" is displayed on the screen. If not, change the setting following theprocedure below.Open the menu and select [VCR SETUP]. Select [AV/PHONES H ], set it to[PHONES H ] and close the menu.Adjusting the Headphone VolumeOpen the menu and select [AUDIO SETUP]. Select [ H VOLUME], adjust thevolume with the SET dial and close the menu.You can turn off the volume completely by turning the SET dial down until [OFF] appears.Turn the SET dial up to increase the volume again.Recording with an External MicrophoneYou can attach a commercially availablemicrophone or the optional DM-50 DirectionalStereo Microphone to the accessory shoe.Refer also to the instruction manual of themicrophone.1. Attach the microphone to theaccessory shoe.2. When using a commercially availablemicrophone, connect it to the MICterminal.❍ When recording in silent places, the built-in microphone may pick up themotor noise of the camcorder. In such case, we recommend using an externalmicrophone.❍ When using a commercially available microphone:- Use a microphone with built-in power supply (condenser microphone). Almostall stereo microphones with a plug diameter of 0.14 in. (3.5 mm) can beconnected. The audio level may differ from that of the built-in microphone.- Long microphones may appear on the screen.CARD PLAYCARD CAMERAPLAY (VCR)CAMERACARD PLAYCARD CAMERAPLAY (VCR)CAMERAVCR SETUP AV/PHONES ••AV( 38)HVOLUME•••••AUDIO SETUP( 38)
