67Advanced Functions -RecordingEUsing the Multi-Image ScreenYou can operate the multi-image screen only in the following playback modes:- When [S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse playback- When [S.SPEED] is set to [FAST], [MOD.] or [SLOW]: Playback pauseIn CAMERA mode, set the program selector to Q.1. Press the DIGITAL EFFECTS button.[D.EFFECT |], [FADER], [EFFECT] and [MULTI-S] appear.2. Select [MULTI-S].[S.SPEED] and [S.SPLIT] appears.3. Select [S.SPEED].[MANUAL], [FAST], [MOD.] and [SLOW] appear.4. Select the transition speed.Following transition speeds can be selected: fast (every 4 frames), moderate (every 6frames*), slow (every 8 frames*).* In Low Light mode: moderate (every 8 frames), slow (every 12 frames).5. Select [MULTI-S] again.[S.SPEED] and [S.SPLIT] appears.6. Select [S.SPLIT].[4], [9], [16] settings appear.7. Select the number of sequences.8. Press the DIGITAL EFFECTS button.“MULTI-S” flashes.9. Press the ON/OFF button.• MANUAL: Images will be captured each time you press theON/OFF button. The blue frame indicating the next sequencedisappears after the last image. To cancel the last capturedimage, press and hold the ON/OFF button. To cancel themulti-image screen, press and release the ON/OFF button.• FAST, MODERATE, SLOW: The set number of images will be captured at the setspeed. To cancel the multi-image screen, press the ON/OFF button.10.Press the start/stop button to begin recording.The multi-image screen is recorded on the tape.CARD PLAYCARD CAMERAPLAY (VCR)CAMERA
