Canon Elura 60 Instruction Manual

Also see for imageRunner 60: Brochure & specs Instruction manual Instruction manual Brochure & specs

Contents

Canon Elura 60 Instruction Manual Manual pdf 90 page image

90Playing Back the Added SoundYou can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjustthe balance of both sounds.1. Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO], selecta setting and close the menu.• STEREO 1: Plays back the original sound.• STEREO 2: Plays back the added sound.• MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level.• MIX/VARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted.2. If you have selected [MIX/VARI.], adjust the mix level: Open the menuand select [AUDIO SETUP]. Select [MIX BALANCE], adjust the balancewith the SET dial and close the menu.Turn the SET dial down to increase the volume of Stereo 1 and up to increase thevolume of Stereo 2.❍ The camcorder resets to [STEREO 1] when you turn the camcorder off.However, the mix balance is memorized by the camcorder.❍ You can also press the 12bit AUDIO OUT button on the wireless controller toselect the audio output. However, the mix balance can only be adjusted in themenu.CARD PLAYCARD CAMERAPLAY (VCR)CAMERA12bit AUDIO•••STEREO1AUDIO SETUP( 38)