79Advanced Functions -Other FunctionsETurning Off the Image StabilizerThe image stabilizer compensates for camcorder shake even at full telephoto. It triesto compensate for horizontal movements; therefore, you may decide to turn it offwhen you mount the camcorder on a tripod.Open the menu and select [CAMERA SETUP]. Select [IMG STAB i], set itto [OFF] and close the menu.“i” disappears.❍ The image stabilizer cannot be turned off when the program selector is set to[.❍ The image stabilizer is designed to compensate a normal degree of camcordershake.❍ The image stabilizer might not be as effective when using the night modes.Demonstration ModeThe demonstration mode displays the camcorder’s main features. It startsautomatically when you leave the camcorder turned on without loading a recordingmedia for more than 5 minutes. However, you can set the camcorder not to start thedemonstration mode.Open the menu and select [DISPLAY SETUP/ ]. Select [DEMO MODE], setit to [OFF] and close the menu.To cancel the demo mode once it has begun, press any button, turn off thecamcorder or load a recording media.CARD PLAYCARD CAMERAPLAY (VCR)CAMERACARD PLAYCARD CAMERAPLAY (VCR)CAMERADEMO MODE••••ONDISPLAY SETUP/( 38)IMG STAB •••ONCAMERA SETUP( 38)