Shoot by Lighting or Scene Type823 On the Quick Control screen,select the lighting or scene type.Press the <Q> button (7).Press the <V> key to select [Default setting]. [Light/scene-based shots] will appear on thescreen.Press the <U> key or turn the<6> dial to select the desiredlighting or scene type.X The resulting image with the selectedlighting or scene type will bedisplayed.4 Take the picture.Press the shutter button completely totake the picture.To shoot through the viewfinder, firstpress the <A> button to exit LiveView shooting. Then press the shutterbutton completely to take the picture.If you change the shooting mode orset the power switch to <2>, thesetting will revert back to [ Defaultsetting].If you use flash, the setting will switch to [ Default setting]. (However,the shooting information will display the lighting or scene type that was set.)If you want to set this together with [Ambience-based shots], set the[Light/scene-based shots] that best matches the ambience you haveset. In the case of [Sunset] for example, warm colors will becomeprominent so the ambience you set may not work well.If you do not want the Live View image to be displayed when settingfunctions, press the <Q> button after step 1. Then you can set [Light/scene-based shots] on the Quick Control screen.COPY