34If you turn on the power switch and the time zone and date/timesetting screens appear, see page 36 to set the time zone and date/time.<k> : The camera turns on. You canshoot movies (p.173).<1> : The camera turns on. You canshoot still photos.<2> : The camera is turned off anddoes not operate. Set to thisposition when not using thecamera.Whenever you set the power switch to <1> or <2>, sensorcleaning will be executed automatically. (A small sound may beheard.) During the sensor cleaning, the LCD monitor will display<f>.You can still shoot during sensor cleaning. Press the shutter buttonhalfway (p.43) to stop the sensor cleaning and take a picture.If you repeatedly turn the power switch <1>/<2> at a shortinterval, the <f> icon may not be displayed. This is normal andnot a problem.To save battery power, the camera turns off automatically afterapprox. 30 seconds of non-operation. To turn on the camera again,just press the shutter button halfway (p.43).You can set the auto power off time with [52: Auto power off](p.205).Turning on the PowerAbout the Automatic Self-Cleaning Sensor3 About Auto Power OffIf you set the power switch to <2> while an image is being recorded tothe card, [Recording...] will be displayed and the power will turn off after thecard finishes recording the image.COPY