287wPrintingYou can crop the image and print onlythe cropped portion as if the image wasrecomposed.Set the cropping right before printing.If you set the cropping and then set theprint settings, you may have to set thecropping again before printing.1 On the print settings screen, select [Cropping].2 Set the cropping frame size, position, and aspect ratio.The image area within the cropping frame will be printed. Thecropping frame’s aspect ratio can be changed with [Paper settings].Changing the cropping frame sizeWhen you press the <u> or <Hy> button, the size of thecropping frame will change. The smaller the cropping frame, thelarger the image magnification will be for printing.Moving the cropping framePress the <S> key to move the frame over the image vertically orhorizontally. Move the cropping frame until it covers the desired image area.Rotating the framePressing the <B> button will toggle the cropping framebetween the vertical and horizontal orientations. This enables youto create a vertically oriented print from a horizontal image.Image tilt correctionBy turning the <6> dial, you can adjust the image tilt angle up to±10 degrees in 0.5-degree increments. When you adjust theimage tilt, the <O> icon on the screen will turn blue.3 Press <0> to exit the cropping.X The print settings screen will reappear.You can check the cropped image area on the upper left of theprint settings screen.Cropping the ImageTilt correctionCOPY
