36When you turn on the power for the first time or if the time zone and date/timehave been reset, the Time zone and Date/Time setting screens will appear.Follow the steps below to set the time zone first. You can also set the time zoneof your current address. Then if you travel to another time zone, you can simplyset your destination’s time zone so that the correct date/time is recorded.Note that the date/time appended to recorded images will be basedon this date/time setting. Be sure to set the correct date/time.[London] is set by default.Press the <M> button.Under the [52] tab, select [Timezone], then press <0>.Press the <U> key to select a time zone.Press <0> so <a> is displayed.Press the <V> key to select the timezone, then press <0>.1 Display the menu screen.Press the <M> button.2 Under the [52] tab, select [Date/Time].Press the <U> key to select the[52] tab.Press the <V> key to select [Date/Time], then press <0>.3 Setting the Time Zone, Date and TimeSet the Time ZoneSet the Date and TimeThe menu setting procedure is explained on pages 46-47.The time displayed on the lower right is the time difference comparedwith Coordinated Universal Time (UTC). If you do not see your timezone, set the time zone while referring to the difference with UTC.COPY