212Handy FeaturesVertical images are rotated automatically so theyare displayed vertically on the camera’s LCDmonitor and on the personal computer instead ofhorizontally. You can change the setting for thisfeature.Under the [51] tab, select [Auto rotate],then press <0>. The available settingsare described below. Select the option,then press <0>.[OnzD] : The vertical image is automatically rotated during playbackon both the camera’s LCD monitor and on the computer.[OnD] : The vertical image is automatically rotated only on thecomputer.[Off] : The vertical image is not automatically rotated.The vertical image is not rotated during the image reviewimmediately after it is captured.Press the <x> button and the image playback will display therotated image.[OnzD] is set, but the image does not rotate during playback.Auto rotate will not work with vertical images captured while [Autorotate] was set to [Off]. If the vertical image is taken while the camerais pointed up or down, the image may not be rotated automatically forplayback. In such a case, see “Rotating the Image” on page 247.On the camera’s LCD monitor, I want to rotate an imagecaptured when [OnD] had been set.Set [OnzD], then play back the image. It will be rotated.The vertical image does not rotate on the computer screen.The software used is not compatible with image rotation. Use thesoftware provided with the camera instead.3 Auto Rotation of Vertical ImagesFAQCOPY
