311With a commercially-available Eye-Fi card already set up, you canautomatically transfer captured images to a personal computer orupload them to an online service via a wireless LAN.The image transfer is a function of the Eye-Fi card. For instructions onhow to set up and use the Eye-Fi card or to troubleshoot any imagetransfer problems, refer to the Eye-Fi card’s instruction manual orcontact the card’s manufacturer.The camera is not guaranteed to support Eye-Fi card functions(including wireless transfer). In case of an issue with an Eye-Ficard, please check with the card manufacturer. Also note thatapproval is required to use Eye-Fi cards in many countries orregions. Without approval, use of the card is not permitted. If itis unclear whether the card has been approved for use in yourarea, please check with the card manufacturer.1 Insert an Eye-Fi card (p.31).2 Select [Eye-Fi settings].Under the [51] tab, select [Eye-Fisettings], then press <0>.This menu is displayed only when anEye-Fi card is inserted into thecamera.3 Enable Eye-Fi transmission.Press <0>, set [Eye-Fi trans.] to[Enable], then press <0>.If you set [Disable], automatictransmission will not occur even withthe Eye-Fi card inserted(transmission status icon I).4 Display the connectioninformation.Select [Connection info.], then press<0>.Using Eye-Fi CardsCOPY