350• Before storing the camera or accessory when not in use, remove the battery pack anddisconnect the power plug. This is to prevent electrical shock, heat generation, andfire.• Do not use the equipment where there is flammable gas. This is to prevent anexplosion or fire.• If you drop the equipment and the casing breaks open to expose the internal parts, donot touch the internal parts due to the possibility of electrical shock.• Do not disassemble or modify the equipment. High-voltage internal parts can causeelectrical shock.• Do not look at the sun or an extremely bright light source through the camera or lens.Doing so may damage your vision.• Keep the camera from the reach of small children. The neck strap can accidentallychoke the child.• Do not store the equipment in dusty or humid places. This is to prevent fire andelectrical shock.• Before using the camera inside an airplane or hospital, check if it is allowed.Electromagnetic waves emitted by the camera may interfere with the plane’sinstruments or the hospital’s medical equipment.• To prevent fire and electrical shock, follow the safeguards below:- Always insert the power plug all the way in.- Do not handle a power plug with wet hands.- When unplugging a power plug, grasp and pull the plug instead of the cord.- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.Also do not twist or tie the cords.- Do not connect too many power plugs to the same power outlet.- Do not use a cord whose insulation has been damaged.• Occasionally unplug the power plug and use a dry cloth to clean off the dust aroundthe power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outletmay become moist and short-circuit the outlet to cause a fire.COPY
