Chapter 33-18F-3-653.4.7.5 Removing the FeedMotor Unit 0005-04091) Loosen the 2 screws [1], and move down the feedmotor [2]; then, tighten the 2 screws you haveloosened [1].F-3-66When mounting it, be sure to loosen the screws [1]and move the feed motor [2] back into its initialposition.2) Remove the 4 screws [1], and disconnect theconnector [2]; then, detach the feed motor unit [3].F-3-67When mounting it, be sure that the timing belt [1]is properly attached to the pulley [2].F-3-683.4.8 Delivery Reversing Roller(upper)3.4.8.1 Removing the FrontCover 0003-70811) Remove the 3 screws [1], and detach the front cover[2] by moving it in the direction of the arrow.[4][1] [1][2][3][1][2][3][1][1][2][1][1] [2][3][1][2]
