Chapter 22-31F-2-262.4.2 Pickup Unit and the Stopper 0002-9493The pickup unit consists of a pickup roller and a separation roller. When the Start key is pressed or the originalpickup signal arrives, the pickup motor (M2) starts to rotate in reverse to move down the pickup unit, and the pickuproller and th separation roller start to rotate to pick up an original. The separation pad and the separation plate areused to make sure that no more than one original is picked up and fed at time of pickup.F-2-272.4.3 Timing of Pickup 0002-9495Sequence of Pickup Operation (small-size)Read standingby positionScanning lampRead roller 1Read sensorNo. 2 registrationlower rollerM1PaperSeparation padSeparation plateFeed rollerGearPickup clutch(CL1) Pickup rollerStopper
