Chapter 33-11F-3-36When detaching it, be sure not to lose the pin [3],as it will come off upon detachment.2) Remove the feeder roller [4].F-3-373) Remove the resin E-ring [5], and detach the pickuproller [6].Pay attention to the orientation of the pickup rollerand the feed roller.Moreover, be sure that the separation front guide [7]is mounted so that the wider side of the sheet [8] istoward the pickup roller side.3.4.3 Separation Plate/Separation Pad3.4.3.1 Removing the Insidecover 0003-34881) Open the feeder cover, and remove the 2 screws [1];then, detach the inside cover [2].F-3-383.4.3.2 Removing the PickupRoller Unit 0003-34891) Remove the 2 resin E-rings [1] and the 2 bushings[2]; then, detach the pickup roller unit [3].F-3-393.4.3.3 Removing theSeparation Plate and theSeparation Pad 0003-34861) Remove the 2 screws [1], and detach the separationplate [2] and the separation pad [3].[1][1][3][2][3] [8][7][4][6][5][1][2][1][1][2][3][2]
