Chapter 33-32F-3-1253.4.14.6 Removing the FeedMotor Unit 0004-04601) Loosen the 2 screws [1], and move down the feedmotor [2]; then, tighten the 2 screws you haveloosened [1].F-3-126When mounting it, be sure to loosen the screws [1]and move the feed motor [2] back into its initialposition.2) Remove the 4 screws [1], and disconnect theconnector [2]; then, detach the feed motor unit [3].F-3-127When mounting it, be sure that the timing belt [1]is properly attached to the pulley [2].F-3-1283.4.14.7 Removing theReversing Roller 0003-80951) Open the open/close guide, and remove the 2 E-rings [1], gear [2], and 2 bushings [3]; then, detach thereversing roller [4].[1][2][3][1][1][2][1][1] [2][3][1][2]
